Genderless High Temperature Connector Body for Large-Volume Sterile Fluid Transfer

Genderless AseptiQuik W Connectors with nominal 1.5" flowpath enable quick and easy sterile connections, in large-volume, high-flow production, and process intensification environments. The 1", 1 ¼”, and 1 ½” genderless design simplifies system integration and minimizes the risk of operator error. The connectors’ robust construction provides reliable performance without the need for clamps or fixtures. Biopharmaceutical manufacturers benefit from interchangeable 1", 1 ¼”, and 1 ½” flow solutions for full-scale bioprocessing production environments with the quality and market availability they expect from the leader in the single-use connection technology.

Specifications

Operating Conditions (Fluid Transfer):
Pressure	Up to 60 psi, 4.1 bar & Up to 75 psi, 5.1 bar for 48 hours
Temperature	34°F to 104°F (1°C to 40°C)
Typical Flow Rate	Cv Value Range: 39 to 118
Termination Size	1", 1 1/4", 1 1/2" hose barb, 1 1/2" Sanitary (25.4mm, 31.75mm, 38.1mm, 38.1mm)
Materials:
Connector	Polycarbonate (white)
Shipping Clip	Polycarbonate (white)
Pull Tabs/Caps	Polycarbonate (white, HT version)
Pull Tab Guide	Polyphenylsulfone (gray)
Side Latch	Polyphenylsulfone (blue)
Seals	Silcone (clear), platinum-cured
Membrane	Hydrophobic Polyethersulfone (HT version), PTFE strip sticker
CV Value:
Gamma	Up to 50 kGy irradiation
Autoclave High Temp (HT) version	Up to 266°F (130°C) for 60 minutes
Cv~1.2 max (1/2" hose barb)
Cv values represent the approximate expected flow rate in gallons per minute of water at room temperature for a 1 PSI pressure drop. The flow is generally constrained by the smallest diameter, which in some cases will be the termination diameter and not the Nominal Flow Path.

Features

Genderless: Eases single-use systems specifications with one part number for both halves.
FLIP-ALIGN-PULL-SNAP: Intuitive four-step connection process reduces risk of operator error.
Secure Side Latches: Increases connector robustness for wide variety of applications.
No Secondary Component Needed: No need to purchase and store extra materials or tools to complete your sterile connection process.
Largest AseptiQuik Flow Diameter (1.5" Nominal Flow Path): Move liquid medias faster to increase process efficiency.

Documentation

AseptiQuik W Connectors

Click on Datasheet link for a full list of our product datasheets!

Videos

Videos Coming Soon!

Check out all of our videos on our YouTube Channel!

W Connectors

W Connectors

W Connectors W Connectors